RESOPilot Neo

Motorcycle Helmet Intercom

DuoSync technology delivers a seamless fusion of hardware and software mesh that automatically and instantly switches between connection paths. Even when distance or signal fluctuations cause dropouts, the system automatically reconnects without manual intervention, ensuring uninterrupted coverage. With an available internet connection, such as a mobile hotspot,software Mesh can extending your communication range without limits.

RESOPilot Pro features DuoSync technology (Dual Mesh), while RESOPilot Neo only supports hardware Mesh.Beyond communication capabilities, RESOPilot Pro is equipped with a built-in GNSS Module that enables SOS support and real-time location tracking, whereas RESOPilot Neo does not have a built-in GNSS Module.

For added entertainment, RESOPilot Pro also features built-in FM Radio, allowing users to listen to FM radio independently, while RESOPilot Neo does not support FM Radio.

Mobile Hotspot / Wi-Fi:

Connect your device through the Reso Link App, then select and connect to a hotspot or Wi-Fi network. Once the connection is established, Software Mesh will be activated automatically.

Bluetooth Tethering:

For iPhone users:Go to Settings > Personal Hotspot and enable “Allow Others to Join.” We recommend turning off “Maximize Compatibility.” Then put your RESOPilot device into Bluetooth pairing mode and find and connect to the RESOPilot device from your phone’s Bluetooth list.

For Android users:Go to Settings > Personal Hotspot / Tethering and enable “Bluetooth tethering.” Then pair and connect your RESOPilot device through your phone’s Bluetooth settings.

With DuoSync technology, Hardware Mesh and Software Mesh work together to support up to 30 users in group communication. Hardware Mesh alone supports up to 15 users.

Full-Load Mode (Dual Mesh + Music + GNSS): ~13 hours

Audio / Navigation Mode (Audio Playback + GNSS): ~18 hours

Power-Saving Mode (Bluetooth Intercom only): ~33 hours

Powered by 15W fast charging, a quick 5-minute charge delivers up to around 2 hours of use, and 30 minutes gets you to about 80%.A full charge takes approximately 55 minutes.

Pro : Supports both USB-C Connection and Direct Bluetooth Connection.

Compatibility List:

1.USB-C Connection:

DJI Osmo 360 /360 II/ Action 3/ Action 4/Action 5 Pro/ Action 6

2.Direct Bluetooth Connection:

Insta360 X2 / X3 / X4 / X5 / X6 / Ace Pro / Ace Pro 2

DJI OSMO 360 / 360 Ⅱ/Action 6

GoPro HERO12

Pro support three ways to create a group:

1. Using the device buttons: After powering on, all members who want to join the group should press and hold the Mesh button to enter group setup mode. The indicator will flash red and green alternately. After successfully joining the group, it will flash green and purple alternately. Once the voice prompt confirms that the group member count is correct, any member can press and hold the Mesh button again to complete the group setup.

2. Using voice commands: Say “Hey, Reso” / “Hey, Pilot” → “Start Mesh Teaming” / “Start Mesh Grouping.”

3. Using the Reso Link App: Open the group function in the app and follow the instructions to create or join a group.

Compatibility: Pro, Neo, and Lite are compatible with each other and can join the same group for intercom communication.

Up to 7.5 miles / 12 km (Hardware Mesh) | Unlimited range with DuoSync technology (Software Mesh).

Yes. RESOPilot Neo and Pro share the same Hardware Mesh communication Protocol and can connect, group, and communicate seamlessly together.

The warranty timeline varies by Product category:

RESOPilot Pro, Neo, Lite: 3-Year Limited Warranty

Accessories: 1-Year Limited Warranty

RESOPilot Pro features DuoSync technology (dual-channel Mesh ）, while RESOPilot Neo only supports hardware Mesh. In addition, RESOPilot Pro is equipped with a built-in GNSS Module that enables SOS safeguard alerts and real-time location tracking whereas RESOPilot Neo does not have a built-in GNSS Module.

Up to 15 riders (Hardware Mesh) with dynamic multi-hop routing.

Full-Load Mode (Active Mesh Intercom + Bluetooth Music): ~24 hours of continuous use.

Powered by 15W fast charging, a quick 5-minute charge delivers up to around 2 hours of use, and 30 minutes gets you to about 80%.A full charge takes approximately 55 minutes.

Neo : Supports both USB-C Connection and Direct Bluetooth Connection.

Compatibility List:

1.USB-C Connection:

DJI Osmo 360 /360 II/ Action 3/ Action 4/Action 5 Pro/ Action 6

2.Direct Bluetooth Connection:

Insta360 X2 / X3 / X4 / X5 / X6 / Ace Pro / Ace Pro 2

DJI OSMO 360 / 360 Ⅱ/Action 6

GoPro HERO12

Neo support three ways to create a group:

1. Using the device buttons: After powering on, all members who want to join the group should press and hold the Mesh button to enter group setup mode. The indicator will flash red and green alternately. After successfully joining the group, it will flash green and purple alternately. Once the voice prompt confirms that the group member count is correct, any member can press and hold the Mesh button again to complete the group setup.

2. Using voice commands: Say “Hey, Reso” / “Hey, Pilot” → “Start Mesh Teaming” / “Start Mesh Grouping.”

3. Using the Reso Link App: Open the group function in the app and follow the instructions to create or join a group.

Compatibility: Pro, Neo, and Lite are compatible with each other and can join the same group for intercom communication.

Up to 7.5 miles / 12 km (Hardware Mesh only).

Yes. RESOPilot Neo and Pro share the same Hardware Mesh communication Protocol and can connect, group, and communicate seamlessly together.

The warranty timeline varies by Product category:

RESOPilot Pro, Neo, Lite: 3-Year Limited Warranty

Accessories: 1-Year Limited Warranty